Innokin iTaste Arachnid MOD

£25.00

Clear

SKU: N/A Categories: ,

Description

Innokin iTaste Arachnid MOD

A fantastic mech mod, this MOD has really low voltage drop even down to 3.7volts. The locking switch and adjustable pins are well machined and the threads are nice and thick. Innokin have out done themselves with this Mod.

The Primary Features of The iTaste ARACHNID:

Positive connector Pin:
The positive connector pin can be adjusted to varying heights.
To adjust the connector pin turn the pin clockwise (+) or counterclockwise (-)

Telescopic tube:
To expand or contract the telescopic tube turn it Clockwise (+) and counterclockwise (-). The iTaste ARACHNID supports 18650, 18500, 18350 batteries.

Working current:
The iTaste ARACHNID’s working current = 4.2/(R+0.15),if you use a 0.45Ohm atomizer, make sure your battery’s minimum working current is more than 7A 4.2/(0.45+0.15)。

Lock and unlock ring:
To unlock and lock the firing button turn the ring counter clockwise (-) or Clockwise (+).

Technical Specifications:
Battery: We recommend using high quality IMR high-drain 18650, 18500, 18350 batteries (Sold Separately). (Diameter: 18.3+/-0.2mm, Length: 34.5~66.5mm, Unprotected) The iTaste ARACHNID cannot use 2 stacked batteries. Input Voltage: 3.2~4.3V

 

Note: please DO NOT stack batteries as this is a mechanical mod with no circuitry, you will effectively double your voltage which can and will destroy attached devices.

Additionally: MODS are for advanced users only,who know the technical side of vaping and have a good understanding of ohms law and of electrical circuits. These devices have no protection circuits whatsoever.

*We recommend the Bonza RDA or Crius V2 RTA for use with this device.

You may also like…